Discover Ultimate Wellness with Cedar Indoor Saunas
Luxury, Health, and Relaxation - Crafted with Quality Cedar Wood
Our Indoor Saunas bring the spa experience to your home or business.
Crafted from cedar wood, our saunas are designed for relaxation and health benefits.
DIY Precut Sauna Kit
Please send us an email with the depth, height, and width of your room to do a custom quote for you.
How Our Precut Saunas Work
Rooms must be prepared ahead of sauna installation, including studding, insulation, and 3/4" plywood for attaching paneling.
These ARE NOT Modular Saunas. Once they're built, they stay where they are.
You determine your sizing then reach out to us for a customized quote for one of our saunas.
You frame the room and we send you the pre-cut kit for your sauna.
We offer many options for our saunas that most contractors are not familiar with.
If your contractor can't install our sauna then we have options to install them with our professionals too.
Indoor Sauna Options
Project Type
Board Run
Stove Type
Door Style/Size
Bench Width
Floor Type
Size Range for Your Sauna
Here is a rough range of sizes for how many people you're looking to accommodate.
Remember you can customize your indoor sauna to any size you need.
Learn About Our Saunas
What is Euro-Trim?
Euro-Trim design" (for an extra 10% charge) enables lower boards to be removed/replaced without replacing the entire wall.
Full-length boards are also available up to 84" in length.
Custom Order Pricing
We can cut the boards to your specifications if you list your dimensions when submitting the order, but the price will be rounded to the nearest 6" list price.
Heater Sizing
Secure & Fast Delivery
Every unit is well packaged in a heavy-duty crate and shipped as soon as it’s ready.
Our lead times are 8 - 12 weeks and one of the lowest in the market.
What Our Blueprints Look Like:
Once you Request An Estimate, we will give you the cost and a free blueprint of what your sauna will look like.
We do this to make sure we are both 100% on the right page before you make your order.
We suggest that you review this with your contractor before purchasing sauna.
DOWNLOAD an Example of a Sauna Blueprint
FAQs
Yes! As of 2024 Cedar Sense has partnered with Scandia Manufacturing to provide people with the top-quality Scandia Saunas.
Scandia has been a staple-point in American Sauna since 1964. A trusted loyal brand that everyone can trust.
Not at all. We've made the partnership in good faith that our pricing mirrors Scandia Sauna.
What we provide through Cedar Sense are some sauna accessories that are made from us along with other products such as candles, oils, and more that Scandia does not provide.
Plus we are a small family run business which provides high-quality 1-on-1 customer experience.
Damp mop the floor as needed. The benches can be cleaned with a mild soap applied with a wet cloth.
To remove perspiration stains on the wall boards light sanding with 120 grit sandpaper may be required periodically.
To keep your room looking at its best always lay or sit on towels.
Apply sauna wood oil periodically as needed to refurbish the wood, especially in commercial applications.
Heat up time is fast-about 30 minutes-and the Sauna is only on when being used, unlike spas.
The average home Sauna costs as little as $3 per month to operate, when used for an hour 3 times a week.
Western Red Cedar is the preferred wood for sauna.
Thermowood Nordic spruce and Aspen are also excellent choices, but not as practical for commercial applications, as the light colored wood makes it more difficult to keep it clean.
A true portable (modular) sauna allows for quick assembly/disassembly to move from place to place and also has the ability to be plugged into a 15 amp and or 20 amp 120v outlet.
Portable saunas are small, light-weight and not intended for commercial applications.
They are mostly intended for light use, residential applications.
These saunas ARE NOT portable/modular saunas.
The ceiling height should be no higher than 7 ft, as it is important to bring the heat down to where the bathers can use it at bench level.
It is also more economical to heat, and the Sauna will heat faster. Some commercial saunas require an 8 ft ceiling, in this case, attention must be paid when sizing the heater.
Saunas beyond 8 ft in height can cause the heater to work too hard and malfunction.
Yes, but you will need to secure plywood onto your metal frame.
Wood on the inside of your framing is needed to provide a surface for the wall boards to be nailed to.
Another option would be to apply wood nailers across/in-between the metal studs to provide locations to secure/nail the wall boards to.
This method would require a vertical installation of wall boards.
Yes. When we take the order, we go through a pre-cut worksheet which asks for the stud to stud measurements. Some angles may need to be cut-on-site.
No, in many instances where the heater is placed by the door, a vent is typically not necessary.
If the heater is located in an area in the room away from fresh air, we recommend that venting is planned.
Yes, insulation prevents heat loss. We recommend R-11 or R-13 fiberglass insulation. The insulation may be standard paper faced. All the walls and the ceiling should be insulated.
A Sauna must have a waterproof floor so that it can be easily washed and kept clean and sanitary, and free of odor.
We recommend washable floors such as tile, sealed cement/concrete, or heavy duty vinyl.
Wooden flooring is not hygienic in a sauna as it absorbs perspiration, facilitates odor causing bacteria, and it cannot be thoroughly cleaned.
Commercial Saunas should have a floor drain to remove excess water by bathers and for cleaning purposes. Most residential Saunas do not need a floor drain, unless a water hose is used for cleaning.