Three-Zone Linear White LED Neon Sauna Light Kit
$790.00
You save
Create layered, adjustable illumination with the
Three-Zone Linear White LED Neon Sauna Light Kit.
This complete sauna lights system includes three
10-foot flexible LED fixtures that can be controlled and dimmed independently for under-bench, backrest, floor, cove, or exterior lighting.
- Three independently controlled lighting zones
- Three 10-foot flexible white LED fixtures
- Warm 3500K illumination with 1%–100% dimming
- Battery-free wireless three-zone control
- 2.4 GHz Wi-Fi control through the Tuya Smart app
- Sauna-rated IP67 LED fixtures and connections
Layered Sauna Lighting With Independent Zone Control
Create separate lighting scenes under the benches, behind the backrests, along the floor, or around another architectural feature.
Three flexible 10-foot white LED fixtures are paired with individual drivers and a three-button wireless controller, allowing each zone to be switched and dimmed separately.
Three independent zones
Warm 3500K white light
1%–100% dimming
Wi-Fi and RF control
Installation must be completed by a qualified electrician in accordance with applicable national and local electrical codes.
Lighting That Adapts to the Room
Flexible fixtures and separate controls make it possible to create multiple layers of indirect lighting instead of relying on one bright overhead fixture.
Independent Zone Control
Operate and dim three lighting areas separately to create different scenes throughout the sauna.
Sauna-Rated LED Fixtures
The flexible white LED fixtures and their protected connections carry an IP67 rating for moisture resistance.
Warm White Illumination
The 3500K color temperature provides a warm, natural-looking glow that complements wood sauna interiors.
Adjustable Length
The fixtures can be field-cut at the designated cut marks and sealed according to the installation instructions.
Build the Lighting Plan Around Your Sauna
Use the three zones for different parts of the room or combine them to create one complete ambient-lighting scene.
The controller’s three sections correspond to the three separate drivers, allowing each fixture to be adjusted without changing the other two.
Cast a low glow across the floor and beneath the seating.
Add indirect illumination behind or below the backrest.
Illuminate a floor edge, exterior detail, or custom recessed feature.
What’s Included
Three-Zone Control
Battery-free wireless controller for individual zone operation.
RF Drivers and Receivers
One dedicated driver and receiver for each lighting zone.
10-Foot LED Fixtures
Three flexible 3500K white LED neon fixtures.
120-Watt Power Supply
120V AC input with 24V DC output for the lighting system.
30-Foot Light Cables
Extended cables for connecting each driver to its fixture.
Four-Way DC Splitter
Distributes power from the power supply to the zone drivers.
Clips and Screws
Mounting hardware for securing the three LED fixtures.
Silicone Sealant
Used when properly sealing a fixture that has been field-cut.
Wireless Wall Control or Smart-Device Operation
The three-zone RF controller can be mounted to the wall or used as a handheld control. It generates its own operating energy when pressed, so it does not require batteries.
Wi-Fi control is available through the Tuya Smart app using a compatible 2.4 GHz wireless network.
Battery-Free Control
The self-powered three-zone controller uses a 433 MHz RF signal.
1%–100% Adjustment
Increase or reduce the brightness of each zone independently.
Wi-Fi Connectivity
Connect through a 2.4 GHz network using the Tuya Smart app.
Important Installation Requirements
Sauna lighting placement affects safety, performance, comfort, and the finished appearance of the room.
Licensed Electrician
Electrical installation and wiring must be completed by a qualified electrician following all applicable codes.
Heater Clearance
Do not install an LED fixture above the heater or within 20 inches of its sides.
Check Temperatures
Measure the actual temperature at every planned component location before completing installation.
Keep Power Equipment Dry
The power supply and drivers are IP20 components and must remain in suitable dry, protected locations.
Indirect Light Placement
Position fixtures so they produce a diffused glow rather than shining directly into sauna users’ eyes.
Uncoil Before Testing
Fully uncoil each LED fixture before applying power to prevent heat buildup and product damage.
Avoid folding, sharply bending, or twisting the flexible fixture. Follow the complete installation guide for cutting, sealing, mounting, wiring, startup, and testing.
Three-Zone Sauna Light Kit Specifications
Read the Complete Guide Before Installation
The installation and operation guide covers safety requirements, package contents, specifications, LED handling, wiring, mounting, control setup, Wi-Fi connection, testing, troubleshooting, and replacement components.
Opens the complete specification and installation guide in a new tab.
Three-Zone Sauna Lights FAQs
How many LED fixtures are included?
Can each lighting zone be controlled separately?
What color are the sauna lights?
Can the LED fixtures be shortened?
Does the wireless controller require batteries?
Can the sauna lights be controlled from a phone?
Can the lights be installed directly above the sauna heater?
Can I install the system myself?
Are the power supply and drivers waterproof?
Create Three Layers of Warm, Adjustable Light.
Contact Cedar Sense for help planning fixture placement, selecting the correct kit, or coordinating the lights with your sauna project.
Shipping & Delivery
Cedar Sense offers a wide range of products—some are built by our team, and others are sourced from trusted partner brands. Because of this, each product has its own shipping & delivery policy.
- Made-by-Cedar Sense items: Shipping details vary by build schedule, crating, and destination.
- Partner-brand items: Shipping details vary by manufacturer lead times and certified carriers.
- Freight deliveries: Many large items ship via scheduled freight and may be curbside delivery.
- Coordination: When applicable, carriers contact you to schedule a delivery window after the item ships.
If you have questions before ordering, we’re happy to help: (218) 760-2041 or [email protected].
