Single-Zone Linear White LED Neon Sauna Light Kit
Price range: $490.00 through $820.00
You save
Create warm, adjustable accent lighting with the
Single-Zone Linear White LED Neon Sauna Light Kit.
This flexible sauna lights LED system is designed for
indirect placement beneath benches, behind backrests, inside coves, and along custom recessed features.
- Choose one 16-foot, two 16-foot, or four 10-foot fixtures
- All connected fixtures operate together as one zone
- Warm 3500K white illumination
- Adjustable from 1% to 100% brightness
- Battery-free wireless dimming control
- 2.4 GHz Wi-Fi control through the Tuya Smart app
- IP67-rated LED fixtures and connections
One Lighting Zone. Multiple Ways to Transform the Sauna.
Add a soft architectural glow beneath benches, behind backrests, inside coves, or along another recessed feature.
Choose from one 16-foot fixture, two 16-foot fixtures, or four 10-foot fixtures. Every connected light responds together through one wireless dimming control.
Single-zone operation
Three kit configurations
1%–100% dimming
RF and Wi-Fi control
All fixtures in the selected kit operate together. Choose the three-zone system when different lighting areas need separate controls.
A Softer Alternative to Bright Overhead Fixtures
Flexible linear fixtures make it possible to conceal the source of the light while allowing its glow to highlight the surrounding wood.
Warm White Illumination
The 3500K color temperature produces a warm, natural-looking white light that complements cedar and other sauna woods.
Flexible Placement
Install the fixtures beneath benches, behind backrests, inside coves, or within custom recessed lighting details.
Field-Adjustable Length
Fixtures may be shortened at designated 1.9-inch cut marks and resealed according to the installation instructions.
Sauna-Rated Fixtures
The LED fixtures and protected twist-lock connections carry an IP67 moisture-resistance rating.
Three Single-Zone Configurations
Select the configuration that provides enough linear lighting for your bench, backrest, cove, or custom sauna layout.
One 16-Foot Fixture
A streamlined choice for one continuous run beneath a bench, behind a backrest, or around a compact recessed detail.
- 1 × 16-foot LED fixture
- 48 watts total
- 1,584 lumens
- One 30-foot light cable
- 120-watt power supply
- 16 mounting clips and screws
Two 16-Foot Fixtures
Use two longer runs for multiple benches, two backrests, or separate physical locations that should brighten together.
- 2 × 16-foot LED fixtures
- 96 watts total
- 3,168 lumens
- Two 30-foot light cables
- 120-watt power supply
- 32 mounting clips and screws
Four 10-Foot Fixtures
Four individual runs provide greater placement flexibility while remaining synchronized through one lighting zone.
- 4 × 10-foot LED fixtures
- 120 watts total
- 3,960 lumens
- Four 30-foot light cables
- 160-watt power supply
- 40 mounting clips and screws
The two-fixture and four-fixture configurations still use one driver and one controller. All connected fixtures switch and dim together.
Adjust the Entire Lighting Scene Together
A single-zone system is ideal when every fixture should turn on, turn off, brighten, and dim at the same time.
Multiple strips may be installed in different physical locations, but they remain synchronized through the shared driver and controller.
Control every connected fixture as one complete lighting group.
Dim the entire scene anywhere from 1% through 100%.
Connect through the Tuya Smart app using a 2.4 GHz Wi-Fi network.
What’s Included
Fixture, cable, clip, and power-supply quantities vary according to the selected light configuration.
Single-Zone Dimming Control
Battery-free wireless RF control for switching and dimming every connected fixture together.
RF Driver and Receiver
Shared 24V driver with capacity for as many as four fixtures and 40 total linear feet.
White LED Fixtures
One or more flexible 3500K LED neon fixtures based on the selected configuration.
Power Supply
A 120-watt or 160-watt supply matched to the selected fixture package.
AC Power Cable
Connects the supplied power equipment to the required power source.
30-Foot Light Cables
One extension cable is included for each LED fixture in the kit.
Four-Way DC Cable
Allows the shared system to connect multiple LED fixture runs.
Clips, Screws and Sealant
Mounting hardware and silicone for installation and properly sealing approved field-cut ends.
No Control Wiring and No Batteries
The self-powered RF controller generates its operating energy when pressed. It may be mounted in an approved location or used as a portable control.
The Wi-Fi-enabled driver also supports operation through the Tuya Smart app on compatible iOS and Android devices.
Wireless Signal
433 MHz RF operation with a listed signal distance of up to 100 feet.
Full Dimming Range
Adjust the synchronized lighting scene from 1% through 100%.
Wi-Fi Operation
Connect through a 2.4 GHz network using the Tuya Smart app.
Important Sauna Lighting Requirements
Final placement must account for temperature, moisture, heater clearances, component ratings, service access, and visual comfort.
Qualified Electrician
Electrical installation and wiring must be performed by a qualified electrician following national and local codes.
Heater Clearance
Do not mount an LED fixture above the heater or within 20 inches of either side of the heater.
Dry Power Equipment
The IP20 driver and power supply must remain in a dry, protected location away from condensation and weather.
Control Placement
An interior controller must remain below 135°F, no more than 30 inches above the floor, and at least 36 inches from the heater.
Indirect Illumination
Conceal or shield the fixtures so the LEDs do not shine directly into sauna users’ eyes.
Uncoil Before Powering
Completely uncoil every fixture before testing or applying power to prevent trapped heat and damage.
Mounting clips are generally positioned approximately 12 to 18 inches apart. Follow the complete guide for cutting, sealing, wiring, mounting, testing, and Wi-Fi setup.
Single-Zone Sauna Light Specifications
Fixture Configuration Specifications
Review the Complete Guide Before Ordering
The manual covers package contents, specifications, fixture handling, connection diagrams, installation, startup, Wi-Fi setup, troubleshooting, and replacement components.
The complete PDF opens in a separate browser tab.
Single-Zone Sauna Lights FAQs
What does single-zone lighting mean?
Can the single-zone kit include more than one LED fixture?
Which configuration should I choose?
What color light does the system produce?
Can the fixtures be shortened?
Does the wireless controller need batteries?
Can I control the lights from my phone?
Can the lights be mounted near the heater?
Do I need a qualified electrician?
When should I choose the three-zone kit instead?
Choose the Right Fixture Length for Your Sauna.
Contact Cedar Sense for help comparing configurations, planning placement, or deciding between single-zone and three-zone control.
| SIZES | 16′ x #1, 16′ x #2, 10′ x #4 |
|---|
Shipping & Delivery
Cedar Sense offers a wide range of products—some are built by our team, and others are sourced from trusted partner brands. Because of this, each product has its own shipping & delivery policy.
- Made-by-Cedar Sense items: Shipping details vary by build schedule, crating, and destination.
- Partner-brand items: Shipping details vary by manufacturer lead times and certified carriers.
- Freight deliveries: Many large items ship via scheduled freight and may be curbside delivery.
- Coordination: When applicable, carriers contact you to schedule a delivery window after the item ships.
If you have questions before ordering, we’re happy to help: (218) 760-2041 or [email protected].
